probst SRG-UNI-1,5 Betriebsanleitung Seite 34

Installation
4 Installation
4.1 Mechanical connection
Use only original accessories, in case of doubt consult the manufacturer.
Take care that the carrying capacity / working load limit (WLL) of the lifting device/carrier is not exceeded,
through the load of the device, the attaching devices (turning device, fork sleeves etc.) and the additional
load of the gripping goods!
4.1.1 Lifting eye / Suspension bolt
●
The device is equipped with a lifting eye / suspension bolt and can be mounted on various carrier /
lifting devices.
●
Take care that the lifting eye / suspension bolt is safely joined with the lifting tackle (e.g. crane hook,
belt) and cannot slide down.
4.1.2 Load hook and chains
●
Fit suspension ring in the load hook of the lifting device/carrier.
●
Ensure that the single chains strands are not twisted or knotted.
●
Attaching the device to the lifting device/carrier, take care that all local safety regulation is observed.
5440.0015 V2
10 / 17
GB