Herunterladen Diese Seite drucken

Package Contents; Information About This Manual; Hazard Information - HomeMatic HmIP-WHS2 Installations- Und Bdienungsanleitung

Vorschau ausblenden Andere Handbücher für HmIP-WHS2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Package contents

1
Package contents
Switching actuator for heating
1x
systems – 2 channels
4x Screws, 3.0 x 30 mm
4x Wall plugs, 5 mm
1x Operating manual
2 Information about this
manual
Please read this manual carefully be-
fore operating your Homematic IP
components. Keep the manual so you
can refer to it at a later date if you need
to. If you hand over the device to other
persons for use, please hand over this
manual as well.
Symbols used:
Important! This indicates a haz-
ard.
Please note: This section contains
important additional information!

3 Hazard information

Do not open the device. It does
not contain any parts that need to
be maintained by the user. In the
event of an error, please have the
device checked by an expert.
For safety and licensing reasons
(CE), unauthorised changes and/
or modifications to the device are
not permitted.
The device may only be operated
in dry and dust-free environment
and must be protected from the
effects of moisture, vibrations,
solar or other methods of heat
radiation, cold and mechanical
loads.
The device is not a toy: do not
allow children to play with it. Do
not leave packaging material lying
around. Plastic films/bags, pieces
of polystyrene, etc., can be dan-
gerous in the hands of a child.
We accept no liability for damage
to property or personal injury
caused by improper use or the
failure to observe the hazard
warnings. In such cases, all war-
ranty claims are void. We accept
no liability for any consequential
damage.
The device may only be used for
fixed installations. The device
must be securely attached within
a fixed installation.
Please take the technical data (in
particular the maximum permissi-
ble effective installed load of the
device and the type of load to be
connected) into account before
connecting a load! All load data
relates to ohmic loads. Do not
exceed the capacity specified for
the device.
When connecting to the device
terminals, observe the cables and
cable cross-sections permitted for
this purpose.
16

Werbung

loading