Service And Maintenance; Customer Service; Maintenance Recommendations; Cleaning The Chair - Topro Modena Betriebsanleitung

SERVICE & MAINTENANCE

8. SERVICE AND MAINTENANCE

The life span and the reliability of the chair depend on the proper use and the compliance with
the service intervals.
DANGER!
Maintenance works on parts of the electric system have to be only
carried out by certified electricians.
Before carrying out any maintenance, the chair has to be disconnected
from any power source.
Disconnect the power cable from the electric socket and secure the chair
against accidental re-activation.
WARNING!
Maintenance works on parts of the electric system have to be only
carried out by certified electricians.
The covers and enclosures must not be opened, removed or damaged.
Maintenance only whilst chair is not moving.
HINT!
The product can be damaged by improper assembly or dismantling. The
foll owing therefore applies in principle for all service and dismantling work:
• Marking the parts in their shared identity.
• Marking and noting the installation position and location.
• Dismantle, clean and store component groups separately.
Aft er the repair work the following applies in principle:
• Check that all bolted connections are tight.
• Close and lock all covers.

8.1 Customer service

Any defects or malfunctions have to be reported immediately to your certified dealer. He will be
provided with the needed information, documents and replacement parts for the repair if requested.
For further information contact the TOPRO customer service at +49 (0) 8141-888939-0 or
via E-Mail at cs@topro de
56

8.2 Maintenance recommendations

Regular maintenance helps the product to remain without malfunctioning.
This can be carried out by the owner.
HINT!
Some of the noted tasks depend on the amount and the environment of
use.
The maintenance cycles noted in chapter 8.2.2 are minimum cycles.
Depending on the product individual cycles are possible.

8 2 1 Cleaning the chair

Covering fabrics: You can clean the fabrics with a clean vacuum cleaner. To remove stains use
customary fabric cleaner. Please obey the instructions of the cleaner used.
IMPORTANT!
Don't use any solvents like alcohol, petrol or similar.

8 2 2 Maintenance cycles

IMPORTANT!
Please carry out maintenance work as noted in the chart below:
Activity
Visual examination
Cleaning
Functional testing of remote control
SERVICE & MAINTENANCE
Interval / description
At least every 6 months
Regular (if needed)
At least every 6 months
57