Initial Operation; Sitting Down Safely; Standing Up - Topro Modena Betriebsanleitung

OPERATION

6.1 Initial operation

WARNING!
Other persons and items in the operating area of the chair can get hurt!
IMPORTANT!
The user has to make sure there are no other persons
or pets in the operation area (danger zone) of the chair.
For initial operation the following steps have to be completed:
• Check the energy supply.
• Check that all parts are assembled and locked in.
• Do a test run. Make sure all moving parts can move free and have enough space.
1
2
Chart 9: Sitting down on the chair
52

6 1 1 Sitting down safely

1. Stand in front of the chair and push the red
button of the remote control (1.) until the seat
has reached the perfect height for your buttocks.
2. Press the yellow button to raise the backrest for
getting up again (2.).
HINT!
Stop pressing the yellow button
(2) once chair reached seating
position.
6 1 2 Lying
1. Push the yellow button (1.) until the chair reclined
into a comfortable lying position.
2. Press the red button to raise the backrest and to
get up again (2.).
HINT!
Stop pressing the red button
(2) once chair reached seating
position.

6 1 3 Standing up

1. Hold the red button (1.). The chair will rise from the
lying position through the sitting position and then
to the standing-up function. While the chair lifts
up, you can hold yourself on the armrests for more
safety.
2. O nce the chair reached the optimal height, release
the red button (1.).
HINT!
TOPRO suggest leaving the
chair in the optimal height so you
can lean and sit down comfortably
the next time you want to use the
chair.
OPERATION
1
2
Chart 10: Lying in the chair
1
Chart 11: Standing-up function
53