Descaling Procedure - Philips HD8829 Gebrauchsanweisung

Descaling procedure

Calc
clean
3 sec.
Memo Memo Memo
Aroma plus
Espresso Cappuccino Coffee
Hot water
Milk clean
Calc
clean
Memo Memo Memo
Aroma plus Espresso Cappuccino Coffee
Hot water
Milk clean Calc
clean
Memo Memo Memo
Aroma plus
Espresso Cappuccino Coffee
Hot water
Milk clean Calc
clean
pause the descaling or rinsing cycle by pressing the ESPRESSO button. To
continue the descaling or rinsing cycle, press the ESPRESSO button.
1 Insert the hot water dispensing spout. (if it is not installed).
2 Remove and empty the drip tray and coffee grounds container. Place the
drip tray and coffee grounds container back into place.
3 Remove the water tank and the "INTENZA+" water filter from the water
tank (if present), replace it with the small white original one.
4 Pour the descaling solution in the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level. Place the water tank back in the
machine.
5 Place a large container (1.5 l) under both the hot water/steam wand and
coffee dispensing spout.
6 Press and hold the CALC CLEAN button for 3 seconds to start the
descaling cycle. The ESPRESSO button lights up continuously and the
CALC CLEAN button flashes throughout the cycle.
7 The descaling cycle light lights up continuously. The machine starts
dispensing the descaling solution at intervals for approximately 20
minutes.
8 Let the machine dispense the descaling solution until the no water light
lights up continuously.
9 Remove the water tank and rinse it. Fill the water tank with fresh water up
to the MAX level and place it back in the machine.
10 Empty the drip tray and container and place it back.
11 The rinse cycle light lights up continuously. When the ESPRESSO button
flashes, press it to start the rinsing cycle.
12 When the rinsing cycle is finished the CALC CLEAN button goes out.
English
25