How to place and remove the automatic milk frother
1
1
2
3 The machine stops brewing when the preset level is reached.
Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the previously
selected beverage button.
Brewing 2 cups of espresso and coffee
1 Place two cups under the coffee dispensing spout.
2 Press the ESPRESSO or COFFEE button twice to brew the selected
coffee.
-
The button of the selected beverage flashes twice quickly.
The machine grinds and doses automatically the correct amount of
coffee. Brewing two cups of a beverage requires two grinding and
brewing cycles the machine carries out automatically.
3 The machine stops brewing when the preset level is reached.
Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the previously
selected beverage button.
Note: Do not force the automatic milk frother while inserting it.
1 If the hot water dispensing spout is installed, press the release buttons on
both sides of the hot water dispensing spout (1) and remove it (2).
2 Slightly tilt the automatic milk frother and insert it all the way into the
guides of the machine.
3 Push the automatic milk frother downwards while turning it until it locks
into the machine.
English
15