Proper Use And Operation - SELFSAT SNIPE PRO Bedienungsanleitung

1-2. Proper use and operation

This product has been designed for fixed installation on vehicles with maximum speeds of
130 km/h. It is designed to automatically aim an antenna at geostationary television satellites.
The power to the system is supplied by a standard vehicle electrical system with a rated
voltage of 12 or 24 Volts DC.
Use of the equipment for any other purpose to the one specified is not permitted.
Please also note the following instructions from the manufacturer :
• It is not permitted to change the overall device by removing or adding individual components.
• The use of any other components to those originally installed is not permissible.
• Installation must only be performed by sufficiently qualified personnel. All instructions in the supplied Installation
Instructions, which is separately provided, must be carefully followed.
• The product does not require any regular maintenance. Housings and enclosures must not be opened. Check and
maintenance work should always be carried out by a qualified specialist.
• All of the relevant and approved guidelines of the automotive industry must be observed and complied with.
• The equipment must only be installed on hard vehicle roofs.
• Avoid to clean your vehicle with the mounted satellite system in a single-bay or drive-through car wash or with a
high-pressure cleaner.
3