SELFSAT SNIPE PRO Bedienungsanleitung Seite 20

B. Assemble 6pcs of M4x20 bolt at the fix bracket
B-1
Put back the mounting plate on the silicone
applied and make 6holes (2mm) with power drill
B-3
Assemble bolts
C. Apply siliconebetween fix bracket and friction tape
C-1
Apply silicone around mounting plate
C-3
Remove friction tape and get dry
B-2
Apply silicone on the holes
B-4
Re-apply silicone to cover bolts assembled
C-2
Tidy the area silicone applied
C-4
The image you will see. Place main unit on the
top of fixed plate
19