About Your Scanner - Albrecht AE125H Bedienungsanleitung

LCD Message Batt. Type
Charging
No Battery
Charge
Complete
Charge Off
Battery Error
Illegal Voltage Ni-MH
See also Setting the Charging Timer, page 87.
If the batteries are good, the scanner charges the batteries. If the
scanner cannot immediately determine if the batteries are good and can
be charged, it checks them. If the scanner judges the batteries are good,
the scanner starts charging. If it cannot regard the batteries as good, the
scanner stops checking and the battery icon blinks.

About your Scanner

We use a few simple terms in this manual to explain the features of the
scanner. Familiarize yourself with these terms and the scanner's
features, and you can put the scanner to work for you right away. Simply
determine the type of communications you want to receive, then set the
scanner to search those communications.
A frequency, expressed in kHz or MHz, is the tuning location of a station.
To find active frequencies, you use the search function or refer to a
frequency reference.
Besides searching within a selected frequency range, you can also
search your scanner's service banks. Service banks are preset groups of
frequencies categorized by the type of services that use those
frequencies. For example, many amateur radio frequencies are located
in the HAM service bank.
Ni-MH Scanner is charging.
None NO batteries in scanner. Off
Ni-MH Unit is charged.
Alk./Ni- MH Scanner is not charging
(Battery selection switch
is set to Alk.)
Ni-MH Batteries cannot be
charged (dead battery).
USB external power is
out of range.
Meaning
English
Scanner Cond.
Off
Off
Off
Off
Off
79