LaserLiner LaserRange-Master i5 Bedienungsanleitung Seite 17

Digital bubble level:
The digital bubble level is used to horizontally align the measuring device.
Tilt sensor calibration:
To calibrate the tilt sensor follow the instructions on the display.
Speicher-Funktion:
Das Gerät verfügt über 50 Speicherplätze.
Important notices
– The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
– The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
– The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
– The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
– In unfavourable conditions, e.g. with poorly reflecting surfaces,
the maximum deviation may be greater than 3 mm.
– Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
– Measurements made through glass (window panes) can falsify
measurement results.
– An energy-saving function switches the device off automatically.
– Clean with a soft cloth. Water may not be allowed to penetrate
the housing.
LaserRange-Master i5
01 ... 50
EN
17