Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ment of which is not described, should be
replaced only by the manufacturer (DNI-
PRO M LLC), DNIPRO-M service centre or
by the seller of the product. For power
tools with Y-type power cable connec-
tions: the replacement of the cable, if
needed, for safety purposes, should be
carried out by the manufacturer or the
manufacturer's representative.
12.
STORAGE AND
TRANSPORTATION
It is recommended to store the power
tool in a dry, well-ventilated room inac-
cessible to children, protecting it from di-
rect sunlight, at a temperature from -5°C
to +40°C and a relative humidity of no
more than 80%.
If you start using the power tool immedi-
ately after moving it from the cold, it may
malfunction.
Keep the power tool, technical documen-
tation and accessories in the original case
or packaging (depending on the configu-
ration). In this case, all available informa-
tion and details will always be available.
The power tool can be transported by all
types of transport that ensure its pres-
ervation, in accordance with the gener-
al rules of transportation. During loading
and unloading operations and transporta-
tion, the power tool should not be sub-
ject to shocks or exposure to atmospher-
ic precipitation. Placement and fastening
of the power tool in vehicles must en-
sure a stable position and no possibili-
ty of movement during transportation.
Take care not to damage the power tool
during transportation. Do not place heavy
objects on the power tool.
The service life of the power tool is 5
years from the date of sale.
13. DISPOSAL
Do not dispose of power tools with
household waste!
Power tools that have been decom-
missioned are subject to separate
storage and disposal in accordance
with environmental legislation.
EU-PS0823001-0823001
14.
DECLARATION OF
CONFORMITY
EC DECLARATION CONFORMITY
Type: Sheet sander
Model: PS-30S
The above product(s) correspond to:
2006/42/ЕС Directive Machinery
2014/30/EU Electromagnetic Compati-
bility Directive
2011/65/EU RoHS Directive
The following harmonised standards
were applied:
EN 62841–1:2015/AC:2015; EN 62841–2-
4:2014/AC:2015;
EN 61000–3–2:2014; EN 61000–3–3:2013;
EN IEC 55014–1:2017/A11:2020; EN IEC
55014–2:1997/A2:2008.
Name and address of technical docu-
mentation holder EU authorized repre-
sentative:
Dnipro-M stores sp. z o.o. (Dnipro-M
stores LLC)
Adama Branickiego Str., 21 lok. U3, 02-
972 Warsaw, Poland
Manufacturer
LLC "DNIPRO M", str. I. Mazepy, 10, Kyiv,
01010, Ukraine. Made in China.
WW.DNIPRO-M.PL
Importer and authorized representative
in EU: Dnipro-M stores sp. z o.o.
Adama Branickiego Str., 21, lok. U3, 02-
972 Warsaw, Poland.
Board Chairman:
Zviagintseva Tetiana
Date: 08/03/2023
en
21
Werbung
