Notes On Energy Saving; Software Update; Automatic Update - T+A Caruso R Bedienungsanleitung

Notes on Energy Saving

The Caruso R satisfies the requirements of the latest directives concerning energy-saving measures (EuP
directive). The modern design of the mains power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are not currently required
are automatically switched off.
The device also has an automatic shutdown function (Auto Power Down).
If no music signal and no operation is detected for more than 20, 30 or 60 minutes (depending on the
setting in the system menu), the Caruso R enters standby mode automatically.
In standby mode the power consumption depends on the still active functions of the Caruso R. Please
refer to the technical data for details.
In countries outside the EU, in which the EuP directive has no validity, the automatic power-down feature can
j
be disabled if necessary.

Software update

General information
Software updates keep your Caruso R up-to-date. They bring new optimisations like faster operation and
new features which were not available at the time the device was produced.

Automatic update

If the device is connected to the Internet, the Caruso R checks whether a new software version is available
for the device after power-on. If an update is available, the Caruso R starts the update automatically.
The progress of the update is shown on the display. Wait until the process is completely finished. This may
take a few minutes.
Only after switching on the device with the power switch on the rear panel or after switching on from Eco
j
standby (no Alexa and no network active) a check for new software is performed.
Notice
In order to avoid problems after updating the software, do not disconnect the
Caruso R from the power supply during the update process.
82