T+A Caruso R Bedienungsanleitung Seite 72

Pairing Bluetooth headphones
• Turn on the headphones and bring them into pairing mode.
• Start searching for devices by tapping rescan.
• After a short while, the appropriate device (headphones) should appear in the lower list (Available devices).
• Tap on the name of the headphone in the list to connect it to the Caruso R.
• Once the connection is established, the headphones will appear in the upper list.
• If the headphones will be used in the future, they can be selected and connected directly from here.
• To disconnect the Bluetooth connection, you can simply turn off the headphones.
• Alternatively, the connection can be terminated by tapping Disconnect.
• Playback will then automatically return to the speakers.
Depending on the number of Bluetooth devices which are in the range of the Caruso R, it is possible that the
j
desired device is not displayed in the list of available devices. In this case, all Bluetooth devices that are not
required should be deactivated and the search should be restarted.
FM
FM
Settings
Station search
Volumen
20
FM
Strong stations only
Mono channels only
FM Stationlist
Volumen
20
72
List of preset stations
Search: Number of channels is x
End of search: x
Start Auto Scan
Switch on radio deemphasis
75 μs (for regions
such as United States).
For Europe, it is set by
default to 50 μs.
starts the channel scan
Adjusting the sensitivity
during the search process
Automatic switching between
mono and stereo reception
or permanent mono reception
Automatic channel scan
Status of the active channel scan
Number of channels found
These stations are automatically
added to the FM station list