Analog Out; Digital In; Loudspeaker; Mains Connection And Switch - T+A Caruso R Bedienungsanleitung

6 ANALOG OUT

ANALOG
SUB
Headphones

DIGITAL IN

7
USB
COAXIAL
OPT

8 LOUDSPEAKER

9 MAINS CONNECTION and SWITCH

Notice
4
56
Analog audio output (Pre Out), for connecting e.g. active loudspeakers. The level of this
output is variable.
Output socket for an active subwoofer.
The connection of a subwoofer is optional.
Socket for stereo headphones.
Connection socket for a USB memory stick or an external hard drive.
Input for digital source devices with electrical coaxial digital output.
Input for digital source devices with optical TOSLINK digital output.
One pair of speakers can be connected (
Connect the red terminal marked „+" to the corresponding terminal marked on the speaker
and the black terminal marked „-" to the corresponding „-" terminal on the speaker. Screw
the terminals tight and make sure that there are no short circuits. All four terminals carry
voltage! Never connect the right output terminals to the left output terminals!
The mains cable is plugged into this socket. The switch disconnects the device from the
mains.
When the main power switch is turned off, the unit is not completely disconnected from the
mains. To disconnect the unit completely from the mains, the mains plug must be
withdrawn.
1
5
2 7
9
RIGHT and LEFT
3
6
8
).
Notice
In order to avoid any
damages, connect the Caru-
so R and the other compo-
nents to the power supply
only after all necessary con-
nections have been made.