T+A Caruso R Bedienungsanleitung Seite 68

Tone control
Treble
Midrange
Bass
Contour
Presence
Contour
Fundamental
Subwoofer
Subwoofer-
Crossover
Subwoofer-
level
Max. volume level
Speaker
Analog out
j
68
This menu point can be used to disable (by-pass) the Caruso Rs tone controls.
When the tone controls are switched off, any adjustments you made to the following
menu points "BASS", „MIDRANGE" and "TREBLE" have no effect.
This menu point allows you to alter the treble setting.
This menu point allows you to alter the midrange setting.
This menu point allows you to alter the bass setting.
The purpose of this menu point is to adjust the Contour filter for the Presence range.
This option enables you to improve speech intelligibility in spoken word programmes,
documentaries and sport transmissions.
The purpose of this menu point is to adjust the Contour filter for the fundamental tone.
If you prefer a warmer sound image, amplify the fundamental sound (+1 ... +3). For a
cooler sound image, or to eliminate resonance effects, the fundamental tone should be
reduced (-1 ... -2).
This menu item enables and disables the subwoofer output for the connection of an
external subwoofer.
In this menu point you can set the crossover frequency for your subwoofer.
The volume of the subwoofer can be adjusted at this point. Adjust the volume of the
subwoofer to suit the acoustic conditions of the listening room, and the volume of the
other channels.
Here you can set the maximum volume of the Caruso R.
The Caruso R´s loudspeaker outputs can be switched on and off under this menu item.
In this menu item, the analog output ANALOG OUT can be switched on and off in-
dependently of the Caruso R´s loudspeakers outputs e.g. for the operation of active
loudspeakers in an adjacent room.
When headphones are connected, all menu items that have no effect on playback via
headphones are not visible.