Network Menu; Status Page; Network Configuration - T+A Caruso R Bedienungsanleitung

Network menu

Status page

Network status
Connection
IP address
MAC address
SSID
RSSI
Network reset

Network configuration

WPS configuration
Sound quality
Volumen
Low
Medium
20
High
Depending on the bandwidth of your
Internet and network connection, you can
select the sound quality (bit rate) of the
streamed content here.
Select the quality level in order to avoid
dropouts during playback.
Network configuration
SSID
Password
Volumen
20
• Make sure that no LAN cable is connected to the LAN 1 socket and that the WiFi antenna is con-
nected (see „Connection and wiring" on page
enter
• Tap on
• The list 1 shows the detected WiFi networks.
• Select the desired WiFi by tapping it.
• The selected wireless network is displayed in the SSID field 2
• Now tap into the field for the WiFi password 3 to open the keyboard.
• Enter the WiFi password and confirm with Enter on the keyboard.
• Save the settings by tapping on
• Tap on
cancel
A properly working home network (cable network or WiFi network) with router and (DSL) Internet access
j
must be installed.
Shows current type of connection: wired LAN or WiFi
192.168.13.95
8C:1C:DA:B0:76:E1
(WiFi setup)
SSID (WLAN Name)
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
confirm
cancel
Network configuration (see fig. status page above) to scan for available networks
confirm
5 in order to cancel the network configuration.
wired
wired
confirm
enter
confirm
fig. Status page
1
2
3
4
5
57)
4 .
IP adress
MAC adress
If a wireless connection is used, the name of
the selected network is displayed here.
Signal strength of WiFi connection
The network interface can be reset here.
Opens the WiFi configuration menu
Starts automatic WiFi configuration via
WPS.
69