Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
Before starting operation make sure that the silk cannot be drawn into the intake of the ventilation fan. With
the POWER-switch, you can switch the fan on and off.
After you connected the effect to the mains, the LED FL-1500 Flamelight with DMX starts running.
The device has two operating modes. It can be operated in stand-alone mode via the control board or in
DMX-controlled mode via a standard DMX controller.
The LED FL-1500 Flamelight with DMX features a memory function. The last program selected will begin
anew when the device is restarted.
Control Board
The Control Board offers several features: you can e. g. easily set the starting address or change program
modes.
MODE
DOWN
UP
ENTER
Stand-Alone Operation
Setting:
ADDR
CHND
SLND
MADL
TEST
V11
Enter the menu by pressing the MODE-button. Browse through the
menu by pressing UP or DOWN. Press ENTER in order to select the
desired menu. You can change the selection by pressing UP or
DOWN. Press ENTER in order to confirm. You can leave every mode
by pressing Mode. The functions provided are described in the
following sections.
Function:
DMX starting address
3CH / 6 CH
Master / Slave
AUTO
Auto mode
Fade mode; speed
FADE
adjustment sp1~sp8
COLO: colors 1 ~ 7
Red (0 – 255)
COLO
MANU
Gree (0 – 255)
Blue (0 – 255)
Dimmer
Self test
Software version / operating time
16/18
00092593, Version 1.1
Werbung
Inhaltsverzeichnis
