Touch-Wheel; Sensor Keys - STIEBEL ELTRON FET Bedienung Und Installation

OPERATION
Operation
Symbols
Inside temperature
Symbol for inside temperature
Time program
If the room temperature has been changed for a spe-
cific period, the clock symbol is displayed.
Snowflake
If the outside temperature is below 3 °C, the snowflake
symbol is displayed.
Outside temperature
Symbol for outside temperature
Selection indicator
In the SETTINgS menu, a selection indicator shows the cur-
rent position at all times. The currently selected menu item
is indicated by a dark background. The current menu level is
indicated at the top of the display.

4.3 Touch-Wheel

4.3.1 Program menus
Swipe your finger clockwise or anti-clockwise around the
Touch-Wheel in the various program menus to set a different
value for the relevant menu.
4.3.2 SETTINGS menu
In SETTINgS, swipe a finger clockwise around the Touch-
Wheel to move the selection indicator down the list. Swiping
anti-clockwise moves the selection indicator up the list.
Alongside navigation within the menu structure, the Touch-
Wheel is also used to set parameters. Increase values by swip-
ing clockwise. Reduce values by swiping anti-clockwise.
FET

4.4 Sensor keys

Note
If a key is touched for too long, the device does not
respond.
f Tap the sensor keys only briefly to initiate the re- f
quired action.
4.4.1 Program menus
Note
If there is no user action for more than 1 minute (no
swiping and neither "MENu" nor "OK" are pressed), the
device display automatically reverts to the start screen.
"MENU" sensor key
use the sensor key to scroll left through the menus.
"OK" sensor key
use the sensor key to scroll right through the menus.
4.4.2 SETTINGS menu
Note
If there is no user action for more than 10 minutes (no
swiping and neither "MENu" nor "OK" are pressed), the
device display automatically switches from the menu
structure to the start screen.
Parameter changes made before this which had not
yet been confirmed with "OK" are lost. The parameters
retain the values previously saved.
"MENU" sensor key
The "MENu" sensor key takes you back one menu level.
"OK" sensor key
In the menu level, confirm the selected menu item with "OK".
This takes you to the next menu level down, until you reach
the parameter level.
In the parameter level, touch "OK" to save the currently set
parameters.
Selecting BACK in the menu level takes you one level higher
in the menu.
| 15