Sharp PN-655E Bedienungsanleitung Seite 34

Settings and Adjustments
MODE SELECT 3
[PIP MODES] (See page 33)
Function
Adjustable range
Default
OFF
PIP
PbyP
PbyP2
[PIP SIZE]
Function
Adjustable range
Default
[PIP H-POS]
Function
Adjustable range
Default
[PIP V-POS]
Function
Adjustable range
Default
[PIP BLEND]
Function
Adjustable range
Default
[PIP SOURCE]
Function
Adjustable range (PC) DIGITAL/ANALOG
Adjustable range (AV) COMPONENT/VIDEO
Default
[SOUND CHANGE]
Function
Adjustable range
[MAIN POS]
Function
Adjustable range
Default
[PbyP2 POS]
Function
Adjustable range
Default
[AUTO OFF]
Function
Adjustable range
Default
AUTO
MANUAL
32
E
Sets the display method.
OFF/PIP (Picture in Picture)/PbyP (Picture by Picture)/PbyP2
OFF
Displays one screen.
Displays a sub screen inside a main screen.
Displays a main screen and a sub screen side by side.
Displays a main screen which measures 1280 in width and a sub screen side by side.
Sets the size of the sub screen in PIP mode.
SMALL/MEDIUM/LARGE
SMALL
Adjusts the horizontal position of the sub screen in PIP mode.
0 - 100
99 (Decreasing the value moves the sub screen to the left.)
Adjusts the vertical position of the sub screen in PIP mode.
0 - 100
1 (Increasing the value moves the sub screen upward.)
Displays the sub screen transparently on the main screen in PIP mode.
0 - 15
0 (Increasing the value makes the sub screen more transparent.)
Selects the signal input of the sub screen in PIP (Picture in Picture), PbyP
(Picture by Picture), or PbyP2 mode.
DIGITAL(PC)/VIDEO(AV)
Outputs the specified sound in PIP, PbyP, or PbyP2 mode.
If the main screen is displayed as a full screen by the AUTO OFF function, the sound for
the main screen is output even when the sound for the sub screen is specified.
PC/AV
Specifies whether to display the main screen on the right or left in PbyP or PbyP2 mode.
LEFT/RIGHT
LEFT
Sets the vertical position of the sub screen in PbyP2 mode.
TOP/CENTER/BOTTOM
CENTER
Sets whether to display the main screen as a full screen in PIP, PbyP, or
PbyP2 mode when there is no signal input for the sub screen.
MANUAL/AUTO
AUTO
Displays the main screen as a full screen when there is no signal input for the sub screen.
Displays the sub screen in black when there is no signal input for the sub screen.
(Continued)