DISCOVERY S460S
EXPLORER S460M
6. Fasten the control unit to the wall by using the
provided accessory (bracket) and screws.
Fig. 12
7. As an alternative, it is possible to build in the
control unit by using commercial plates (3mod
ule plates) or the GLOMEX accessory (not
included: code 4.010.0008, see Fig. 13) by bor
ing a hole with a reciprocating saw and using
the drill with 2.5 mm tip (use the template on the
following page for correct dimensions).
8. Connect the 1.5 m coaxial cable to the LNB IN
socket of the satellite receiver (not supplied).
42
www.glomexmobile.com