Technical Specifications - MPM MKD-04M Bedienungsanleitung

The ice cube maker does
not make ice cubes or is
malfunctioning.
Abnormal noise

TECHNICAL SPECIFICATIONS

See the product's nameplate for technical specifications.
Power cord length: 1.50 m
Water tank capacity: 1.2 l
Ice cube bucket capacity: 1.0 l
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
1. The ventilation holes are obstructed.
2. The water temperature is too high.
3. The ambient temperature
temperature is too high.
4. The refrigerant is leaking.
5. The water pump has air bubbles.
1. The fan or the pump is obstructed.
1. Clean the ventilation holes.
2. Fill with water at the room temperature.
3. Move the ice cube maker to a cooler place.
4. Possible failure of the refrigerating system. Contact an
Authorized Service agent.
5. Remove the water drain plug (9) to drain off appox. 50
ml of water to vent the system.
1a. Place the ice cube maker in a correct place and
position.
1b. Contact an Authorized Service agent.
EN
14