SKYTRONIC 351.124 Anleitung Seite 9

5.8 Sensor Setup
CONT: Continuous alarm until any key is pressed..
OFF: No alarm
5.9 H/W Sensor Setup
Note: Sensors and extension alarm are not included with the DVR systemand
may be purchased separately.
Note: For 4CH DVR, there are 4CH Inputs of the Sensor;
For 9CH DVR, there are 8CH Inputs of the Sensor.
5.10 Motion Detector Setup
This section allows you to set up motion detection options for each camera.
Sensor Record Time indicates
how long the recording time is
when the motion or sensor is
triggered.
Alarm
whether the buzzer will sound
when motion is detected.
HARDWARE SENSOR SETUP:
There are 3 different modes for sensor setting:
NOT INSTALLED, NORMAL-CLOSE and
NORMAL-OPEN. Consult the alarm
purchased for more details on which setting is
required.
MOTION DETECTOR SETUP:
ON/OFF: Enable or disable motion detection
recording.
LEVEL: Sensitivity for motion detection.
There are 3 levels sensitivity: Level 1-low,
3- highest
AREA: Select detectable area on the screen.
8
User Manual
On Time indicates