SKYTRONIC 351.124 Anleitung Seite 10

5.11 Hard Drive Setup
This section will display the current hard drive status and usage options
HDD SIZE: indicates the total capacity of the hard drive installed in the DVR.
HDD USED: indicates the space used in the hard disk drive for recording and the
percent used.
HDD FORMAT: will erase all video and data on the installed hard drive and make it
readable by the DVR
Note: You will be prompted for the password when formatting a hard drive. The
default password is "111111"
Area Selection:
Press [▲, ▼, ◄ or ►] button to
select a block, and press [SEL] button to set
the block to detect motion. The area is
detectable when it is clear, the area is not
detectable when it is covert by shadow.
OVERWRITE ENABLED:
ON: overwrite oldest video when hard
drive is full.
OFF: stop recording when hard drive
is full.
9
User Manual