SKYTRONIC 351.124 Anleitung Seite 12

5.15 Miscellaneous Setup - Audio Port Setup
Note: For 4CH DVR, there are 2 Audio inputs;
For 9CH DVR, there are only 1 Audio input.
5.16 Miscellaneous Setup - PTZ Setup
Press [SEL] to select the camera, press [◄] or [►] button to assign the ID.
5.17 Miscellaneous Setup - Image Parameters
You can select the audio recording
function to ON or OFF, and select the
video channel that you like to record the
audio on.
SPEED: Set the baud rate (4800，9600，
19200， 38400) match to your speed dome.
PROTOCOL: Supports "PELCO-D" and
"PELCO-P". Select the protocol
according to your speed dome's protocol.
CAMERA: select the camera channel
which is connected with the speed dome.
ID: Assign an ID to your speed dome.
You can adjust the image parameters
according to your needs.
Move the cursor to this selection and
press [◄] or [►] button to select a channel
you want to adjust, then press [SEL] button
to edit parameters.
11
User Manual