SKYTRONIC 351.124 Anleitung Seite 5

5.1 Firmware Version
`
5.2 Detecting Installed Hard Drive
5.3 Format Hard Drive
Chapter 4: Starting the DVR
After connecting the power adapter
and turning on the power button, the system
will boot-up and display the version and
released date of the DVR firmware.
DVR will detect the installed hard drive
and display the hard drive information.
When the DVR detects a new hard drive,
you will be prompted to format the hard drive
before using the DVR.
Press [SEL] to format or press [MENU]
to cancel.
4
User Manual