Werbung
GYSPRESS
IOT
PUSH
PULL
EN
RESULT OF THE INSTALLATION
OF SELF-PIERCING
RIVET
STAMP
AND
CALIBRATE
HOLES
FOR
FLOW-FORM
RIVETS
To punch the sheet to a specific diameter, it is necessary to use a specific die. This die protects the sheet from damage.
If using Flow-Form rivets, it is necessary to drill metal sheets before in order to put the rivet in place. The punch and
the die above allow for a more precise punching as well as allowing the fitting of Flow-Form rivet.
15
Werbung
