Werbung
As soon as the arm is on the riveting machine, push the
locking pin in the hole.
The axle locks itself automatically
allowed
to become
unlocked.
The locking pin must be clean with no damage. Do
not use any damaged pin.
Using the screw, fasten the extension
supplied with the arm.
CONNECTOR
ASSEMBLY
Screw the required connectors kit for the riveting procedure in the arm support.
and the punch support are correctly in place (see page 3) and screwed.
Punch
As soon as the matrix
provided.
dangerous and may damage the riveting machine.
GYSPRESS
and must not be
mandrel support
and the punch support are in place, tighten
Check that the connection tips are in place after each riveting process. A release is
IOT
PUSH
PULL
The riveting machine is now ready to use.
Rivet
Before assembling, check that the die
matrix
with the spanner
EN
13
Werbung
