Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Connect an Ethernet cable to the RJ-45 connector on the camera and to
your network switch as shown below.
Pin 1
11. Insert the Weidmüller plug into the terminal connector on the back of the
camera.
12. Plug in or switch on the power supply.
13. Go on to Section 2.2 on page 10.
GEUTEBRÜCK TopLine cameras
Ethernet
Patch
Cable
Weidmüller Plug
+ DC In
Gnd
Installation Guide
Network Switch
9
Werbung
