Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Guide
Pin #: 1
Function: Ground
Description: Ground for camera power, I/O-0, I/O-1, I/O-2, and the RS-485 serial
port.
Pin #: 2
Function: DC Out
Description: DC Out supplies +5.0 VDC and can be used to power a small device
such as a relay as illustrated in the schematic drawing on page 34. The maximum
allowed load on DC Out is 100 mA. If an inductive load such as a relay is used with
DC Out, a diode must be connected in parallel with the load as shown in the
schematic.
Pin #: 3
Function: Alternate camera power
Description: Use this pin to supply power to the camera (if you are not supplying
camera power via PoE).
Nominal operating voltage: +12 VDC
Allowed voltage range: +12 to +24 VDC (± 10%)
Maximum power consumption: 5 W
Table 1: Terminal Connector Pin Assignments
30
GEUTEBRÜCK TopLine cameras
Werbung
