Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 The Terminal Connector
The 8-pin terminal connector on the back of the camera can be used to:
„
provide power to the camera (when PoE is not used)
„
access the camera's I/O ports
„
access the camera's RS-485 connection
The terminal connector on the camera is a Weidmüller header.
The recommended mating connector is an 8-pin Weidmüller plug
(Order. no 4.84940).
A Weidmüller plug of this type is shipped with each camera.
NOTICE
Do not apply AC voltages or voltages out of specification to the camera.
1. Apply only DC voltages. Applying AC voltages can seriously damage
the camera.
2. Make sure that the voltages are within the limits specified in Table 1 on
page 30. Applying voltages outside of the specifications can seriously
damage the camera.
GEUTEBRÜCK TopLine cameras
Installation Guide
27
Werbung
