Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Installing the Camera
2.1 Hardware Installation
1. Take the camera and an appropriate lens and move to an environment that
is as dust free as possible.
2. Remove the cap from the lens adapter on the front of the camera.
3. Install the lens on the camera:
„
If you are using a CS-mount lens, carefully screw your lens into the
adapter as far as possible.
„
If you are using a C-mount lens, carefully screw a 5 mm extension ring
into the lens mount on the camera as far as possible and then carefully
screw your lens into the extension ring as far as possible.
4. If your lens has an auto-iris mechanism, connect the lens cable to the DC
Iris control connector on the side of the camera (see the drawings on
page 4).
5. Make the Ethernet connection and apply camera power:
„
If power will be supplied to the camera via the Ethernet network cable
(i.e., Power over Ethernet), go to page 6.
„
If power will be supplied from an external power supply via the camera's
terminal connector, go to page 8.
GEUTEBRÜCK TopLine cameras
Installation Guide
5
Werbung
