Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pin #: 5
Function: RS-485 A+
Description: A+ pin for a standard RS-485 connection.
Pin #: 7
Function: RS-485 B-
Description: B- pin for a standard RS-485 connection.
Table 1: Terminal Connector Pin Assignments
By default, the I/O-0 port is set as an output with its function set to
user settable and the I/O-1 and I/O-2 ports are set as inputs with
their function set to monitor. The explanations in Table 1 and the
schematic on page 34 assume that you have changed the port
settings.
We recommend that I/O connections be made with shielded cable
and that the cable shields be connected to ground. If you are unable
to connect the cable shields to ground or if you use unshielded
cable, we recommend that you install a ferrite bead near to the
camera on each cable to minimize electromagnetic interference.
GEUTEBRÜCK TopLine cameras
Installation Guide
33
Werbung
