Operation; Stand-Alone Mode; Control Board - Futurelight PRO Slim PAR-12 QCL RGBW/RGBA Bedienungsanleitung

OPERATION

After you connected the spot to the mains, the FUTURELIGHT PRO Slim PAR-12/PAR-18 QCL
RGBW/RGBA starts running.
The LED display lights up and you can choose the desired mode via the buttons MODE, ENTER, UP and
DOWN.
The device features a built-in microphone and a rotary-control on the rear panel to adjust the sound
sensitivity.
The device has two operating modes. It can be operated in stand-alone or in DMX-controlled mode.

- STAND-ALONE MODE

Internal programs / speed
Sound control
Setting LED colors, 0 – 100% / strobe effect
Setting solid colors
Setting dimmer curves
- DMX MODE
Setting DMX Channel Mode
Stand-alone mode
In the stand-alone mode, the FUTURELIGHT PRO Slim PAR-12/PAR-18 QCL RGBW/RGBA can be used
without controller.
Disconnect the FUTURELIGHT PRO Slim PAR-12/PAR-18 QCL RGBW/RGBA from the controller.

Control Board

The Control Board offers several features: you can simply set the starting address or run the internal
programs.
Browse through the main menu by pressing MODE. Press ENTER in order to select the desired menu. You
can change the selection by pressing UP or DOWN. Confirm every selection by pressing the ENTER button.
The functions provided are described in the following sections. You can leave every mode by pressing the
MODE button.
Setting internal programs / speed
When the display shows P, you can select the desired internal program. Please see the following table.
Mode:
P
After choosing the program, you can adjust the desired speed. Press the ENTER button until the display
shows S___. Press the ENTER button and select the desired speed (S000 – S100, increasing speed) via the
UP or DOWN buttons. Press ENTER to confirm.
Sound control
Press the MODE button until the display shows SUND. Press the ENTER button and select the sound-
controlled mode - the display shows RUN. Press ENTER to confirm.
The device features a built-in microphone and a rotary-control on the rear panel to adjust the sound
sensitivity.
Value:
P--1
P--2
P--3
P--4
P--5
Function:
Internal program 1
Internal program 2
Internal program 3
Internal program 4
Internal program 5
25/31 00070049.DOC, Version 1.1