Klarstein CONTEMPO Bedienungsanleitung Seite 29

Important information about ventilation mode
• For proper combustion and the exhaust of gases through the chimney of fuel
combustion systems, a sufficient amount of air is required to avoid backflow.
Ductless fans must always be vented to the outside.
• When assessing the air pressure, the entire ventilation system of the house/
flat must be taken into account.
• The legal regulations must be observed for exhaust air routing. If the
extractor hood is operated in recirculation mode with an activated carbon
filter, there are no operating restrictions.
• If you choose exhaust mode, there are two options for ventilation, namely
horizontal ventilation and vertical ventilation. Please use a tool to remove the
cover before use and install the check valve in the opening.
Vertical ventilation
Installation preparations
Make sure the power is turned off before starting installation. The plugs must
be mounted in places where they can be easily unplugged and plugged in. You
will need two helpers to install this hood. You will need the following tools and
materials to complete the installation:
• The right drill for your wall
• Phillips screwdriver
• Tape measure
• Hand saw or jigsaw
Horizontal ventilation
EN
29