Dometic mobitronic PI 150 Bedienungsanleitung Seite 15

PI150
5 Technical description
The device has a compact design for portable use.
5.1 Operating and display elements (fig. 1, page 3)
Item Description
1 Green and yellow LEDs Green LED lights up
2 230 V w output
3 USB connection
4 Negative contact
5 Positive contact
6 Connection
A
NOTICE!
 Make sure that the inverter is connected to the 12 V socket and the ignition
is switched on before you connect a power consuming device.
 Reversing the polarity of the inverter will cause the fuse to blow in the 12 V
plug. The 12 V socket and the power supply must be rated to at least 15 A.
Do not put in a fuse with a higher rating than 15 A.
 Make sure the plug is firmly connected in the socket (fig. 1 2, page 3). If
the connection is loose, the plug may heat up.
 Do not operate any connected consumer unit while driving the vehicle. Only
operate the device when the vehicle is stationary.
I
NOTE
 If you connect the device to the cigarette lighter, remember that the ignition
must be turned on to supply it with power.
 If the device heats up to more than 30 C°, a fan automatically switches on.
EN
Explanation
Yellow LED lights up
Green LED lights up, yel-
low LED flashes slowly
Green LED lights up, yel-
low LED flashes quickly
Green LED lights up, yel-
low LED flashes very
slowly
Inverter is operating
Input voltage is too low
Input voltage is too high
Inverter is too hot
Inverter is overloaded
15