Mains Connection - Ikra IELM 1743 Originalbetriebsanleitung

GB
ENGLISH

MAINS CONNECTION

DANGER!
Operation is only allowed with a safety switch against
stray current (RCD max. stray current of 30mA).
Before use check machine, cable, and plug for any dama-
ges or material fatigue. Repairs should only be carried out
by authorised Service Agents.
Insert the plug of the electrical cable in a socket of suitable
shape, voltage and frequency complying with current
regulations.
Keep the connection and extension cables away from
dangerous moving parts to avoid damaging them.
Only use splash proof extension cables approved for
outdoor purposes. The stranded wire cross-sectional area
of the extension cable must be at least 1.5 mm
up to 25 m and 2.5 mm
2
Only plug-in when machine is switched off.
The device is only intended for use on premises that have
a continuous current carrying capacity of >=100 A per
MAINTENANCE
DANGER!
Before any adjustment, cleaning and mainte-
nance work, switch off the device and discon-
nect it from the power supply.
WARNING
Risk of injury
Caution – Sharp tines
Keep fingers and feet away.
For machines with several tine attachments, ensure that
the movement of one tine attachment can lead to rotation
of the other tine attachments.
When adjusting the machine, be careful that no fingers are
trapped between moving tine attachments and stationary
parts of the machine.
When maintaining the tine bodies, be aware that the tine
bodies can be moved even when the drive is switched off.
STORAGE
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from
unauthorised use.
18
for cables
2
for cables above 25 m.
phase and are supplied from a electrical grid with a rated
voltage of 400/230V.
If necessary, please consult your electricity company to
ensure that the continuous current carrying capacity of
the mains at the connection point is sufficient for connec-
ting the device.
WARNING
WARNING! Electric shock! There is a risk of an injury
caused by electric shock!
Do not use the device if the cable or plug is damaged or
worn.
If the cable is damaged during use, it must be discon-
nected from the mains supply immediately. Do not touch
the cable until it has been disconnected from the mains.
Do not connect a damaged cable to the power supply
and do not touch a damaged cable before disconnecting
it from the power supply, as damaged cables can lead to
contact with active parts.
Check the collection bag at regular intervals for any wear
and aging.
After every work stint, clean the machine thoroughly
to remove all dust and debris, and repair or replace any
faulty parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
Store idle power tools out of the reach of children.
Let the engine cool down, before you store the device in
a closed room.