Installation and Operating Instructions
EN
Weather protection cover AIR1-AAD
9. Seal the edge of the terminal box cover and the joints of the drain channel with silicone, see Fig.18.
2.1.3 Installation Weather protection cover AIR1-AAD XHP
1. Remove screw covers at top of unit before installing the weather protection cover, see Fig.19.
2. Apply sealing tape on the contact surface at the bottom of the weather protection cover unit, see Fig.20.
3. Place weather protection cover on the unit and attach to the unit with the sheet metal parts and mounting brackets.
Screw to unit profile with allen screws, see Fig.21
Please note the different leg lengths of the mounting brackets, see Fig.22
4. Seal the edge of the terminal box cover with silicone (see Fig.23).
Fig.19
Fig.21
Fig.23
7
Fig.18
Fig.20
Fig.22