Helios AIR1-AAD Montage- Und Betriebsvorschrift Seite 14

Installation and Operating Instructions
Weather protection cover AIR1-AAD
EN
2.1.2 Installation Weather protection cover AIR1-AAD XH 3500-8500 and AIR1-AAD RH 5000-15000
1. Ensure that the module units are properly fixed together.
2. Remove screw covers at top of unit before installing the weather protection cover, see Fig.11.
Fig.11
3. Apply sealing tape on the contact surface at the bottom of the weather protection cover unit, see Fig.12.
Fig.12
4. Place the parts of the weather protection cover on the unit, see Fig.13.
Fig.13
5