STIEBEL ELTRON FFB 1 SL electronic comfort Bedienung Und Installation Seite 15

OPeRATION
Menu guide
6. Menu guide
6.1 At a glance
Temperature display
Bar graph showing output
Second display
e.g. throughput
Temperature memory buttons
M1 and M2
Menu button
Childproofing
Wellness programs
Temperature selection (set values)
6.2 Setting the temperature
6.3 Warning indicators
6.4 ECO function
ECO
ECO
www.stiebel-eltron.com
optional variable temperature selection
- 20 to 60 °C
- OFF → Heating is switched off.
Temperature memory buttons for rapid changeover between two programmed temperatures
- Press for 2 seconds to save the preferred temperature: Temperature display flashes 1x and the value is
saved.
- select the programmed temperature
Flashing indicator in case of excess temperature
If the inlet temperature is higher than the preferred temperature, e.g. in conjunction with water preheated
by solar energy, then the temperature display flashes and the second display indicates the inlet tempera-
ture.
Temperature display flashes
Second display, inlet temperature
ECO function for saving water and energy
The water throughput is limited to a maximum value (factory setting 8 l/min; another value can be set in the
menu). To change the max. value, see chapter "Setting the comfort functions".
- ECO on → Symbol on the display
- ECO off → Symbol on the display goes out
A battery change is recommended
Error / Fault display
(see Service mode on the appliance)
Backlighting
Symbols display:
- ECO
- Wellness shower programs
- Automatic water volume control
- Childproofing
ECO water and energy saving
Automatic water volume control
FFB 1 SL | FFB 2 SL | 15