Kesser K-ORW-901 Bedienungsanleitung Seite 14

14
°C, the heating device switches offautomatically. If the room temperature is lower than the
set temperature, the heating turns on again in Eco mode.
Note: If no thermostat is set, the default temperature in Eco mode is 23°C.
Thermostat setting
Desired temperature setting range: 5 °C-30 °C
1. Press the Power/Mode (b) button to set the power mode.
2. Press the thermostat button (c), the temperature indicator flashes.
3. Use the "+" [f] and "-" [e] keys to set the desired temperature.
4. The temperature indicator will stop flashing and the set temperature will be displayed on
the screen. The heater maintains the air temperature in the room by automatically switching
on and off.
Note: Regardless of the operating mode in which you set the temperature, the heater will only
work in ECO mode after the thermostat setting.
Note: The temperature displayed on the screen is only the set temperature.
Timer: Auto Power On
Note: This function should only be set if you want the heating to turn on automatically after a
certain time (1 to 24 hours from the time the function is set). Only turn on the timer in stand-by
mode.
1.Press the power switch [F] to turn on the device. The Sleep/Wake button [a] and the Timer
key [d] light up. The device is now in stand-by mode.
2. Press the timer button [d], the lights [a] and [d] light up, and the start number of hours (0.0)
flashes.
3. Use the "+" and "-" buttons to set the heating time between 1 and 24 hours. This function is
activated as soon as the hour number no longer flashes. The numbers of the countdown are
displayed on the display and the timer icon flashes until the time is up.
4. The heater will turn on automatically when the time is up.
Note: When using timer modes, it should be noted that the heater may turn on if it is
unattended. Always follow the safety instructions provided.
Timer: Automatic power off
Note: This function should only be set if you want the heater to turn off automatically after a
certain time (1 to 24 hours from the time the function is set)
1. When the heater is in operation, press the timer button (d), the lamp (H) lights up and the
starting number of hours (0.0) flashes.
2. Use the "+" and "-" buttons to set the heating time between 1 and 24 hours. This function is
activated as soon as the hour number no longer flashes. The downward counting digits are
displayed on the display.
3. The heater will turn off automatically when the time is up.
Parental control setting
Press both the Sleep/Wake button [a] and the Power/Mode button (b) for 3 seconds, the
buttons will lock and the icon will appear on the display. To unlock the lock, press both
buttons again for 3 seconds.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany