Kesser K-ORW-901 Bedienungsanleitung Seite 13

batteries. Note the +/- polarity indicated on the remote control.
The remote control must be directed at the remote-control sensor on the control
panel.
If the remote control does not work as expected, replace the batteries.
Move the device with the help of the built-in handle.
The remote control can be stored in the compartment integrated into the device when not in
use.
Turn on
Press the power switch [F] to turn on the device. The Sleep/Wake button [a] and the Timer key
[d] light up. The device is now in standby mode, waiting for you to select a mode using the
buttons on the device or the remote control.
Press the button or , the screen and the other buttons will light up as well.
The device beeps.
The following settings can be made via the touch screen or remote control.
Every time a button is pressed, a beep sounds.
Press the Sleep/Wake button [a] to exit standby mode and begin selecting the different
modes. The heater starts working in Eco mode (ECO ).
Setting the heating power and the Eco mode
Press the Power/Mode button [b] to switch between Eco Mode (ECO )High Power Medium
Power Low Power - "Baby Mode". →
At low, medium and high power, the heating is controlled by the thermal shutdown.
Note:
The higher the power, the faster the desired temperature is reached, but the power
consumption is higher. Lower power levels are recommended if the heater is used for a
longer period of time.
Eco Mode
Press the Power/Mode (b) button until the ECO light lights up.
In Eco mode, the heating power is automatically adjusted when the room temperature
approaches the set temperature.
Example: The set temperature is 25°C. If the room temperature is less than 22°C, the heater
works with high power ( ). When the room temperature rises to 23
switchesto medium power ( ). When the room temperature rises to 24
works with low power ( ). When the room temperature reaches the set temperature of 25
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
13
a.Stand-by-Taste
b.Power/Mode button
c.Thermostat-Taste
d.Timer-Taste
e.-: Reduce temperature & hours
Taste
f.+: Button to increase the temperature and
operating hours
Remotes
The remote control requires 2 type A
→ →
www.eshopping.de
°C, the heater
°C, the heater