geo-FENNEL Selection PRO Geo6X SP Bedienungsanleitung Seite 17

EN
D
OPERATION
Set up the laser:
1. on the floor direct
2. screw it onto the multi-functional mount supplied in the kit and fix it onto a tripod
3. fix it on a magnetic surface using the magnets of the multi-functional mount
4. fix it with its mount to a wall using a screw or a nail
5. fix it to a column using the strap attachment
6. fix it parallel to dry wall tracks using the magnets (15)
POWER ON THE LASER
Turn the ON/OFF knob in position ON. Now the instrument is ready-to-operate. An audible and optical
(blinking lines) alarm indicates if the instrument was set up outside of the compensator range. If so,
set up the instrument on a more even surface.
To power off the instrument turn the ON/OFF knob in position OFF . Now the instrument is off.
NOTE:
During transport the ON/OFF knob (transport lock) must be set to „OFF" . Disregard may lead to dama-
ges of the compensator.
ON OFF
17