Surveillance Systems 4CH MPEG4 DVR Bedienungsanleitung Seite 50

Please see the description below for each function:
Function Description
DETECT Enable (ON) or disable (OFF) the function of "Motion Detection".
If this function is enabled, you might need to set the motion detection sensitivity or simply keep the
default values. For details, please see the description below.
Motion Detection Set the detection sensitivity in 4 different adjustable parameters (LS / SS / TS / RE).
Sensitivity
For details about each parameter, please refer to"7.2 DETECTION" at page 21.
(LS / SS / TS / RE)
Alarm Select N.C. (normal closed) / N.O. (normal opened) / OFF for the alarm polarity. For N.C. / N.O.
contact details, please refer to "APPENDIX 1 PIN CONFIGURATION" at page 56.
Motion Detection Set the motion detection area by selecting the area grids with your mouse. Pink grids represent
Setting Area the area that is not being detected while the transparent grids are the area under detection. You
can set multiple areas under detection.
Click "－" (Clear All) to set the whole area undetected.
Click "＋" (Select All) to set the whole area under detection.
Apply / Return To save the setting, click "Apply" and return to "Server Setting" window.
To discard the setting, click "Return" to directly return to "Server Setting" window without saving.
Record
In "Dvr" → "Record", you will see the following items for DVR record settings.
Function
Image Size / Quality
Manual Record / Event
Record / Timer Record
Pre-Alarm Record
Overwrite
Record Timer
In this menu list, you can set the record schedule for normal recording or motion recording.
Description
Choose the image size (FRAME / FIELD / CIF) and quality (BEST / HIGH / NORMAL / BASIC).
Select the record type that the DVR will take recording (Yes / No), and select the IPS setting for the
selected record type.
Check this option if you want to enable the pre-alarm recording function.
When an alarm is triggered, the DVR will record 8MB video data before the alarm event is actually
happened.
Select "Yes" to enable the HDD overwrite function when the HDD is full, or "No" to disable this
function.
When this function is on, and the recording and the pre-alarm function are activated, the DVR will
overwrite 8GB data from the oldest for continuous recording without notice.
~46~
REMOTE OPERATION