Surveillance Systems 4CH MPEG4 DVR Bedienungsanleitung Seite 28

The submenu items are described below:
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all the internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to OFF, item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
4) VLOSS BUZZER
Select to enable or disable the sound when video loss happened (ON / OFF).
5) MOTION BUZZER
Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).
6) ALARM BUZZER
Select to enable or disable the sound when any internal alarm is triggered (ON / OFF).
7) HDD BUZZER
Select to enable or disable the sound (ON / OFF) when the HDD remaining capacity reaches to the value set in
"HDD NEARLY FULL (GB)".
8) ALARM DURATION (SEC)
Press "UP" / "DOWN" to set the duration time of alarm recording in second (5 / 10 / 20 / 40).
9) HDD NEARLY FULL (GB)
If HDD BUZZER is enabled, press "UP" / "DOWN" to have a buzzer notification when the HDD available capacity
is 5/10/15/20 GB left.
7.6 SYSTEM
In this menu list, you can check or change some system settings.
Move to "SYSTEM", and press "ENTER". You will see a similar screen as the following:
ADVANCE
CAMERA
DETECTION
REMOTE
DISPLAY
ALERT
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT SEARCH
EVENT LOG
The submenu items are described below:
1) SERIAL TYPE
Press "UP" / "DOWN" to set the serial type of the DVR (RS485 / RS232).
SERIAL TYPE
BAUDRATE
HOST ID
PASSWORD
RESET DEFAULT
CLEAR HDD
UPGRADE
AUTO KEYLOCK
LANGUAGE
VIDEO FORMAT
VERSION
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
SELECT BACK
SYSTEM
1236-1012-1033-1018-M3-6C1B
NEXT ENTER
~24~
ADVANCED MENU
RS485
2400
0
XXXX
RESET
HDD-MASTER-1
START
NEVER
ENGLISH
NTSC