Surveillance Systems 4CH MPEG4 DVR Bedienungsanleitung Seite 27

5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600 / 115200). For the connected cameras, such as
PTZ and speed dome cameras, etc., please make sure their baud rate setting is the same as the setting here.
7.4 DISPLAY
In this menu list, you can check and change some display settings.
Move to "DISPLAY", and press "ENTER". You will see a similar screen as the following:
ADVANCE
CAMERA
DETECTION
REMOTE
DISPLAY
ALERT
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT SEARCH
EVENT LOG
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable "DE-INTERLACE" function (ON / OFF).
2) FULL SCREEN DWELL DURATION (SEC)
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).
3) CHANNEL TITLE
Select to display the channel title or not (ON / OFF).
4) EVENT STATUS
Select to display the symbols of the event or not (ON / OFF).
5) DATE DISPLAY
Select to display the date or not (ON / OFF).
6) VGA OUTPUT (For Model 4 & 5 only)
Select the VGA output resolution. There are seven options for your choice:
800 x 600 / 1024 x 768 (default) / 1280 x 1024 / 1440 x 900 / 1400 x 1050 / 1680 x 1050 / 1600 x 1200
7.5 ALERT
In this menu list, you can set alerts for different kinds of situations, such as when HDD is full.
Move to "ALERT", and press "ENTER". You will see a similar screen as the following:
ADVANCE
CAMERA
DETECTION
REMOTE
DISPLAY
ALERT
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT SEARCH
EVENT LOG
DE-INTERLACE
FULL SCREEN DWELL DURATION (SEC)
CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
VGA OUTPUT (For Model 4 & 5 only)
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
SELECT BACK
EXT. ALERT
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
SELECT BACK
~23~
DISPLAY
NEXT ENTER
ALERT
NEXT ENTER
ADVANCED MENU
ON
03
ON
ON
ON
1024 X 768
ON
ON
ON
ON
ON
ON
ON
05
05