Surveillance Systems 4CH MPEG4 DVR Bedienungsanleitung Seite 42

Function
Download / Cancel
R e c o r d S e t t i n
R e c o r d S e t t i n
Press " " to go into the "Record Setting" page, and you can set the following items:
‧Record type
‧Hard disk overwriting
‧Pre- / post-alarm record time
‧Record time setting
‧Record path
Record type
In this section, you can select which type of the recording will be enabled. There are 4 options: Manual /
Schedule / Motion / Alarm.
Hard disk overwriting
To overwrite the recorded data from the earliest to the latest when the hard disk is full, check "Hard Disk
Overwrite" checkbox.
Pre- / post-alarm record time
Select the pre-/post-alarm recording time from 0 sec. to 60 sec.
Record time setting
There are two ways to set the record time: Weekly and Custom.
Weekly
Click "Weekly" tab, and you will see a weekly time table indicating the week days (Mon ~ Sun) and hours
(0 ~ 24), similar to the figure below:
X axis: 0 ~ 24 hours. Each time interval within a square is 15 minutes.
Y axis: Monday ~ Sunday.
Operation: You can set the record schedule for 3 record types as needed in this time table:
st
1 timeline -- Schedule record, indicated in yellow,
nd
2 timeline -- Alarm record, indicated in magenta, and
To simply backup images without previewing, deselect the checkbox
"Simultaneous Playback". You will only see a message box indicating the total
time needed, the current status and the saving location.
Click "Download" to start or "Cancel" to discard the video backup.
g
g
Description
~38~
REMOTE OPERATION