Eurolite Led Ip Pad 60X3W Cw/Ww, 51914164 - EuroLite LED IP PAD Series Bedienungsanleitung

IR REMOTE CONTROL
Button
Blackout LEDs off
SPR Internal programs; via „+/-„ the 3 internal programs can be chosen
FL Flash on or off; via „+/-„ the speed can be regulated
SP Speed; via „+/-„the color change and color fade speed can be regulated
D DMX mode
SA No function
SL Master/Slave mode
S Setting DMX address; via 1, 2, 3, 4, 5, 6, 7, 8, 9 the DMX addresses can be set
R (red)
G (green)
Static colors; via „+/-„ the brightness can be regulated
B (blue)

EUROLITE LED IP PAD 60x3W CW/WW, 51914164

- STAND ALONE-MODE
• Manual settings
• Preset settings
• Master/Slave Modus
- DMX MODE
- IR REMOTE CONTROL
STAND ALONE-MODE
Manual settings
With the LED IP PAD 60x3W CW/WW, you can manually select the desired color temperature.
Press the MODE button until the display shows Dimming MODE and press the ENTER button.
As soon as the digits blink, you can select the desired color temperature as well as flash speed via the UP or
DOWN buttons. (see following graphic).
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit this mode.
CW00 01 - 99
WW00 01 - 99
F00 F00-99 (increasing speed)
Preset settings
With the LED IP PAD 60x3W CW/WW, you can select the desired static color temperature from the preset
selection.
Press the MODE button until the display shows PRESET MODE and press the ENTER button.
As soon as the digits blink, you can select the desired preset color temperature as well as flash speed via
the UP or DOWN buttons. (see following graphic).
Please press the ENTER button to confirm and to exit this mode.
CT 01 - 17 (increasing color temperature)
F00 F00-99 (increasing speed)
Parameter
29/32 00069276, Version 1.1