Gemü 52 Original Einbau- Und Montageanleitung Seite 11

Contents
1 General information
2 General safety information
2.1 Information for service and
operating personnel
2.2 Warning notes
2.3 Symbols used
3 Correct use
4 Scope of delivery
5 Technical data
6 Order data
7 Transport and storage
7.1 Transport
7.2 Storage
8 Functional description
8.1 Valve closed
8.2 Valve open
9 Construction
10 Installation and connection
10.1 Installation with solvent
cement sockets
10.2 Installation with threaded sockets 16
10.3 Electrical connection
11 Commissioning
12 Operation
13 Servicing
13.1 Inspection
13.2 Cleaning
13.3 Spare parts
14 Troubleshooting /
Fault clearance
15 Disposal
16 Returns
1 General information
Prerequisites to ensure that the GEMÜ
solenoid valve functions correctly:
Correct transport and storage
✗
Installation and commissioning by trained
✗
personnel
Operation according to these installation,
✗
operating and maintenance instructions
Recommended maintenance
✗
Correct installation, operation, servicing and
repair work ensure faultless solenoid valve
operation.
The descriptions and instructions
apply to the standard versions.
11
For special versions not described
11
in these installation, operating
and maintenance instructions the
11
basic information contained herein
12
applies in combination with any
12
additional special documentation.
13
13
13
2 General safety information
14
15
The safety information in these operating
15
instructions refer only to the individual
15
solenoid valve itself.
15
Potentially dangerous conditions can arise
15
in combination with other plant components,
16
which need to be considered on the basis of
16
a risk analysis.
16
The operator is responsible for the
16
production of the risk analysis and for
compliance with the resulting precautionary
17
measures and regional safety regulations.
18
18
18
2.1 Information for service
18
and operating personnel
18
The installation, operating and maintenance
18
instructions contain fundamental safety
information that must be observed during
19
commissioning, operation and servicing.
19
Non-compliance with these instructions may
19
cause:
Personal hazard due to electrical,
✗
mechanical and chemical eff ects.
Damage to the plant, plant components
✗
or solenoid valve.
Failure of the solenoid valve.
✗
Hazard to the environment due to the
✗
leakage of dangerous materials.
Prior to commissioning:
Read the installation, operating and
●
maintenance instructions.
Provide adequate training for the
●
installation and operating personnel.
11/20
52, 102, 202