Herunterladen Diese Seite drucken

Pfeiffer Vacuum HIPACE 2300 IU Betriebsanleitung Seite 89

Turbopumpe für temperatur management system vorbereitet
Vorschau ausblenden Andere Handbücher für HIPACE 2300 IU:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

● Pumping explosive media
● Pumping of corrosive media
● Pumping of fluids
● Pumping of dust
● Operating without sealing gas (after converting to TMS)
● Operating with impermissible high gas throughput
● Operating with impermissible high fore-vacuum pressure
● Operating with excessive irradiated heat output
● Operating in impermissible high magnetic fields
● Operating in an incorrect gas mode
● Venting with impermissible high venting rates
● Using for pressure generation
● Using in areas with ionizing radiation
● Operation in potentially explosive areas
● Using in systems in which sporadic loads and vibrations or periodic forces act on the device
● Causing of hazardous operating conditions by a presetting on the electronic drive unit that is con-
● Using of accessories or spare parts that are not listed in these instructions
2.7 Personnel qualification
The work described in this document may only be carried out by persons who have appropriate profes-
sional qualifications and the necessary experience or who have completed the necessary training as
provided by Pfeiffer Vacuum.
Training people
1. Train the technical personnel on the product.
2. Only let personnel to be trained work with and on the product when under the supervision of
3. Only allow trained technical personnel to work with the product.
4. Before starting work, make sure that the commissioned personnel have read and understood
2.7.1 Ensuring personnel qualification
Specialist for mechanical work
Only a trained specialist may carry out mechanical work. Within the meaning of this document, special-
ists are people responsible for construction, mechanical installation, troubleshooting and maintenance
of the product, and who have the following qualifications:
● Qualification in the mechanical field in accordance with nationally applicable regulations
● Knowledge of this documentation
Specialist for electrotechnical work
Only a trained electrician may carry out electrical engineering work. Within the meaning of this docu-
ment, electricians are people responsible for electrical installation, commissioning, troubleshooting, and
maintenance of the product, and who have the following qualifications:
● Qualification in the electrical engineering field in accordance with nationally applicable regulations
● Knowledge of this documentation
In addition, these individuals must be familiar with applicable safety regulations and laws, as well as the
other standards, guidelines, and laws referred to in this documentation. The above individuals must
have an explicitly granted operational authorization to commission, program, configure, mark, and earth
devices, systems, and circuits in accordance with safety technology standards.
Trained individuals
Only adequately trained individuals may carry out all works in other transport, storage, operation and
disposal fields. Such training must ensure that individuals are capable of carrying out the required activi-
ties and work steps safely and properly.
trary to the process
trained personnel.
these operating instructions and all applicable documents, in particular the safety, maintenance
and repair information.
Safety
89/146

Werbung

loading

Diese Anleitung auch für:

Hipace 2300 i