Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not connect a damaged appliance. Inform your retailer or
point of sale of any damage. In such a case, keep the
packaging.
• It is recommended that the appliance be allowed to settle for at
least 24 hours before connecting the electrical power supply,
so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To
ensure
sufficient
recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
recommendations.
• The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
• Check that electrical sockets remain accessible when the
appliance is installed.
• When positioning the appliance, ensure the supply cord is not
trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
✓ Install it in an appropriate place (see "Installation
instructions").
✓ Leave the doors open as little time as possible.
✓ To ensure that the appliance operates properly, clean the
condenser regularly (see "Maintenance").
✓ Regularly inspect the door seals and ensure that they are still
ventilation,
condenser).
observe
the
Observe
the
installation
installation
41
Werbung
